TCT Saw Blade For Cutting Wood
This product is widely used for cutting wood. The blade has good sharpness and high efficiency at the process of cutting.With high working performance, the blade would not chip or break slates while cutting.
They appeared perfect cutting result with narrow gap and less chipping, will not damage the edge of the wood.
T.C.T. saw blade for cutting Aluminum
TCT saw blade for cutting aluminum and other non-ferrous profiles with very thin wall thickness. Excellent also for cutting plain aluminum or non-ferrous bars.the work piece must be properly clamped during cutting.
4 Kinds of TCT Circular Saw Blade as follow:
|1st T.C.T. SAW BLADE FOR WOOD|
|2nd T.C.T. SAW BLADE FOR ALUMINUM|
|3rd T.C.T. SAW BLADE FOR LAMINATED PANEL|
|4th T.C.T. SAW BLADE FOR METAL|
1.Please put alloy saw vertically hang the drying rack, be sure to avoid the damp places, do not place alloy saw on the ground or on a shelf,keeping flat will lead alloy blade deformation.
2. Use time, do not exceed the maximum speed. Speed method of calculation is attached for information.
3. Use time, must take protective mask, gloves, helmets,working protection shoes, protective glasses.
4.During the installation Alloy saw, must firstly confirm the function,use of saw table,first read the statement of saw table.Avoid mistakes Install so as to caused the accident.
5.During the installation Alloy saw,must first check whether there is a split distortions, and fill-ping, swaps and other phenomena teeth on alloy saw, and then install it.
6. Super-hard and sharp ofsawtooth alloy saw,prohibit the collision, falling ground, with taking carefully.
7.After install alloy saw blade, the saw core hole must be confirmed whether firmly fixed in the flange of saw table saw, a gasket must be good washer,and then gently hand to push saw blade,confirmed the rotation Whether the eccentric shaking.
|Item Number||Inches||Diameter(mm)||Segment number|
1. TNT/FedEx/DHL/UPS for samples or under 45KG weight goods , Door to Door.
2. By Air or by Sea for batch goods,from airport(seaport) to airport(seaport).
3. Customers specifying freight forwarders or not.
4. Production Time: 3- 7days for samples; 2-3.5 weeks for batch goods.
1) We're a direct manufacturer and 100% export to worldwide(USA, Isrel, Jordan, Iran, Thailand,Duabai, South Africa, Kenya, Egypt, Australia, UK, Spain, Brazil, etc)
2) We have around 15 years producing experience.
3) Our diamond product:TCT saw blade, laser welded saw blade, sintered saw blade, diamond segments, diamond polishing and grinding products, cup wheel, core bits and electroplated diamond products ect.
4) Above 95% customers will place a formal order after testing the samples.
More information about our products, welcome to visit :http://damingtools.en.made-in-china.com/