Diamond Wire Saw Machine for Quarrying Granite Block Squaring

Diamond Wire Saw Machine for Quarrying Granite Block SquaringThe wire saw can apply horizontal, bertical and acclivitous and other direction cutting in the quarry. Diamond wire saw can exploit large specification and regular blocks, the cutting fact is smooth and less hurt to the block, the thin crack of the stone operation can

Featured Products

Diamond Wire Saw Machine for Quarrying Granite Block Squaring

The wire saw can apply horizontal, bertical and acclivitous and other direction cutting in the quarry. Diamond wire saw can exploit large specification and regular blocks, the cutting fact is smooth and less hurt to the block, the thin crack of the stone operation can improve the working condition, and increase the safety factor.

We designed a series of BLD-W products after fully study the cutting condition and technique of diamond wire saw, it used high quality transducer and PLCto realize automatically, reasonably, timely to adjust the cutting techniques.

The electronic feed system, installed on machines, has been specially studied to increase the performance of diamond wire; It allows a constant and uniform feeding during the cutting phase.

The EASYDRIVE system, installed on machines, allows a constant and simultaneous control of diamond wire and advance speed, by means two interfaced inverters. It works fully automated and enables to optimize diamond wire performances as well as to improve the output.

A central gear maintenance free is placed on the rail so that to prevent from mud jam and risk of slipping. The special feed systems gear/cylinders, allows a perfect coupling of the machine on the rail and its perfect displacement on any position, even very slope.

The aluminum flywheel, directly flanged on the motor to eliminate any power loss, can rotate on 360 degree by means hydraulic device to cut on any angulations. The same hydraulic system is used to perform the lateral movement, 45cm preside. Thus it is possible to make two parallel cuts 185cm (140cm+45cm) wide without moving the machine.
 
Tachnical Parameter of Diamond Wire Saw Machine
 BLD-75GBLD-55G
Total power78.75Kw58KW
Main motor power75Kw55KW
Travel motor power0.75Kw0.75KW
Rotary cutting head motor power1.5Kw0.75KW
Shifting cutting head motor power1.5Kw0.75KW
Power supply requirementAC380±10%@ 50HzAC380±10%@ 50Hz
Cutting head rotation360°360°
Shifting distance of cutting head480mm480mm
Lateral movement of cutting head2000mm800mm
Length of rails2m or 3m2m or 3m
Main motor rotate speed0~980r/min(bu inverter0~980r/min(bu inverter
Linear speed of drive flywheel0~40m/s0~40m/s
Speed of machine traveling0~120m/h0~120m/h
Available working temperature-150°C~+400°C-150°C~+400°C
Dimension of the machine(mm)L=1940,W=1440,H=1485L=1925,W=1440,H=1485
Weight2.5T2.2T
Use forgranite or marble quarrygranite or marble quarry
 
BLD-37MBLD-37GBLD-W11Q
40KW40KW 
37KW37KW11KW
0.75KW0.75KW0.37KW
0.75KW0.75KW 
0.75KW0.75KW 
AC380±10%@ 50HzAC380±10%@ 50HzAC380±10%@ 50Hz
360°360°360°(by band)
480mm480mm 
1800mm1800mm 
2m or 3m2m or 3m2m
0~980r/min(bu inverter0~980r/min(bu inverter 
0~40m/s0~40m/s0~40m/s
0~90m/h0~120m/h0~30m/h(by inverter
-15°C~+40°C-15°C~+40°C-15°C~+40°C
L=1925,W=1240,H=1430L=1925,W=1240,H=1430L=12200,W=550,H=640
2.1T2.1T     0.368T 
marble quarryinggranite & marble quarryblock squaring

Diamond Wire Saw Machine for Quarrying Granite Block SquaringDiamond Wire Saw Machine for Quarrying Granite Block Squaring


Diamond Wire Saw Machine for Quarrying Granite Block Squaring
Diamond Wire Saw Machine for Quarrying Granite Block Squaring
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours